Cabinet color is great and it appears to be all wood - can’t tell if it’s all solid pine or not. Some of the pieces look to be smaller pieces that are fused together because the knots cut off abruptly at seams, and I suspect some pieces have wood veneers. One person can put it together pretty easily by themselves. However, it was not easy sailing getting the cabinet together. Not all of the holes line up, which made it very difficult to attach the legs and line up the doors. We adjusted them as much as possible but they are not only not square in the cabinet front, but they also do not close to the same plane because the holes to attach the magnetic closure mechanism aren’t even (and be careful attaching the metal plate because the screw indicated on the instructions will crack the wood. Get a shorter screw or use a washer with the one included with the magnetic closure because that nailhead is too small. There is at least a 1/2” gap between the doors, as you can see from the pics. And instead of a solid piece of plywood (the back is not a wood plank like the rest of the body) there are two thin pieces of plywood held together by a weird plastic piece that doesn’t go the full length of the cabinet. It’s still pretty stylish in spite of the construction flaws and works to hide all of the kiddo’s LEGO creations until we get the playroom finished.

Cute cabinet but was an absolute nightmare to put together. The holes to hang the shelf were not lined up properly so we had to drill our own. And then the shelf itself was too wide to fit into the cabinet without scratching up the sides and almost breaking the whole thing. Like many of the other reviews said, the doors do not hang straight and there is a noticeable gap. We also had to remove the magnetic door closures, because the doors would not close all the way. Luckily we will only be using this to store board games/miscellaneous things, but would not recommend this if you will be going into it frequently.

It is a nice looking cabinet unfortunately the QC of the quality of the cabinet doors and their balanced measurements was poor. Also the paint job was not uniform so one door was more white than the other and it’s because the diagonal crevices on one door simply missed the paint. So I painted it myself. And then I ruined the paint so now I have to do something else with it. Otherwise it’s a nice cabinet I’m a little embarrassed about the doors. It works to house my shredder, inside with an extra five or 6 inches so I can just leave it in the cabinet and put the paper in the shredder and use it and it also houses my printer on top. I guess they have you buy the insurance for the warranty for a product specifically for this purpose but then you have to deal with the whole idea of calling them up and shipping it back and maybe I it’s just it’s sometimes not worth it

Delivery was fast , assembly instructions are easy and clear . I put all together in about an hour. Super cute , provide great storage without take a lot space . But buy buy !

Overall, we are happy with the cabinet. The wood appears decent quality and the color is exactly as pictured. It took quite awhile to put together. Like other reviews mentioned, the doors don’t line up properly. The right door hangs low and the left door hangs high. Since the cabinet came with pre-drilled holes, we were worried about putting in new holes in case of splitting the wood. We tried to adjust the door brackets, but to no avail.

There is 12 in. gap between doors and wood is brittle.

Cabinet color is great and it appears to be all wood - can’t tell if it’s all solid pine or not. Some of the pieces look to be smaller pieces that are fused together because the knots cut off abruptly at seams, and I suspect some pieces have wood veneers. One person can put it together pretty easily by themselves. However, it was not easy sailing getting the cabinet together. Not all of the holes line up, which made it very difficult to attach the legs and line up the doors. We adjusted them as much as possible but they are not only not square in the cabinet front, but they also do not close to the same plane because the holes to attach the magnetic closure mechanism aren’t even (and be careful attaching the metal plate because the screw indicated on the instructions will crack the wood. Get a shorter screw or use a washer with the one included with the magnetic closure because that nailhead is too small. There is at least a 1/2” gap between the doors, as you can see from the pics. And instead of a solid piece of plywood (the back is not a wood plank like the rest of the body) there are two thin pieces of plywood held together by a weird plastic piece that doesn’t go the full length of the cabinet. It’s still pretty stylish in spite of the construction flaws and works to hide all of the kiddo’s LEGO creations until we get the playroom finished.

I love this cabinet so much! I bought different legs to make it taller so I could use it in my coffee corner. Great for storing my kitchen aid and instapot.

So much doesn’t add up. We had to make our own holes and the doors don’t line up. For $200? We are so disappointed.

Design, size, and wood quality are great. Doors mismatched and we had to reorder but other than that, loving the design

it was a bit tricky to put together but it looks very nice and the doors can be adjusted to not have big gaps in the middle

Extremely difficult to assemble and the doors still have a gap, but it's cute overall.

love the chevron deign on this cabinet, went together easy too

ok quality. doors are very difficult to adjust can get a bit wonky. otherwise a good looking piece, relatively easy to assemble.

Doors are never quite lined up. But, overall looks nice for the price

This is such a beautiful piece of furniture! It has such a nice, sleek look and is perfect for storage. Highly recommend!

Really nice and not too bad to assemble.

This accent cabinet has a nice solid feel and was not difficult to assemble with no help. A few of the screws were slightly hard to put into place with a screwdriver so I used a power drill on the lowest setting with no damage or over-torquing issues.

Doors are squared, cabinet is oblonged. Gaps at the top of door on the right side and bottom of left side.

The cabinet is nice, sturdy and functional. The only negative is that the doors don’t meet and there is about a 1 inch gap in the center.